The arc welding robot market will grow by US$62413 million, with a compound annual growth rate of more than 4% between 2021-2025. The report provides the latest analysis on current market condition...
The welding position is referred to when welding, the relative spatial position of the weld to the welder.
Figure 1. Tianqiao welding positon
There are flat welding, horizontal welding, vertical ...
1. Technical essentials of argon tungsten arc welding
1.1 Selection of tungsten argon arc welding machine and power polarity
TIG can be divided into DC and AC pulses. DC pulse TIG is mainly used f...
The selection and preparation of tungsten electrodes for GTAW is essential to optimize results and prevent contamination and rework. Getty Images
Tungsten is a rare metal element used to make gas t...
ER70S‑6 conforms to AWS A5.18. The designation breaks down as follows:
ER – Electrode or filler rod
70 – Minimum tensile strength of the deposited weld metal: 70,000 psi (~490 MPa)
S – Solid wire
6...
The energy source of brazing can be chemical reaction heat or indirect heat energy. It uses a metal with a melting point lower than that of the material to be welded as the solder. After heating, t...