Surfacing Welding Rod D608
D608 is a kind of CrMo cast iron surfacing electrode with graphite type coating. AC/DC. DCRP (Direct CurrentReversed Polarity) is more suitable. Because the surfacing metal is Cr and Mo carbide with cast iron structure, the surfacing layer has higher hardness, higher wear-resistance and excellent silt and ore wear-resistance.
Used for welding parts of agricultural machinery, mining equipment, etc. which receive grit wear and slight impact.
|Chemical Composition of Deposited Metal (%)|
Hardness of Surfacing Layer: HRC≥55
|Reference Current (AC, DC+)|
|Welding Current (A)||90~120||130~160||170~210|
1.The electrodes must be baked under about 250℃ for an hour before welding.
2.In surfacing welding, the weld should be preheated to 400-500℃. If the surfacing thickness permits, a surfacing layer can be made with J507 at first. Then surfacing welding should be done when there is enough heat. The weld should be cooled down slowly after welding.
In carton of 20kgs/net, consisting of 8 boxes x 2.5kgs for 2.5mm, & 4 boxes x 5kgs for other sizes.
With/ without pallets (Fumigation-free pallets) upon customer’s request.
E6013, E6011, E6010, E7018, S.S. E308, E309, E310, E316
Yes, we can print your logo on the welding electrode; also make your brand packing box.
Yes, if you need 1 or 2 kgs. But the freight cost is paid by yourside.
ISO, SGS, our registered brand “ TIANQIAO” “YUANQIAO”, etc.
10-15 days after we received your deposit.
One full 20ft container, that is 25tons.
7 . Payment term?
30% T/T in advance and balance before loading container.
8.Countries and regions exported ?
Europe: Germany, Poland, Italy, Netherlands…
North America: Canada, the USA;
South America: Peru, Chile, Brazil, Venezuela
South East Asia: Thailand, Cambodia, Vietnam, Philippines, Malaysia, Singapore, Indonesia.
7*24, any time you need.
Factory with 20+ years experience in welding electrode formulation research and development
12 months quality warranty and exchange service against B/L date if any quality problem.