In the welding process, there are many matters needing attention. Once neglected, it may be a big mistake. These are the points you must pay attention to if auditing the welding process. If you de...
304 stainless steel (GB/T 06Cr19Ni10) is the most widely utilized type of chromium-nickel stainless steel. As a versatile material, it exhibits excellent corrosion resistance, heat resistance, low...
Welding defects can be divided into two main categories based on their location in the weld: internal defects and external defects.
External defects are located on the outer surface of the weld an...
The welding position is referred to when welding, the relative spatial position of the weld to the welder.
Figure 1. Tianqiao welding positon
There are flat welding, horizontal welding, vertical ...
I. What is welding arc blow?
Welding arc blow refers to the phenomenon that the arc deviates from the original axis direction of the electrode or electrode during the welding process, which wi...
1. What is the purpose of steel annealing?
Answer: ①Reduce the hardness of steel and improve plasticity, so as to facilitate cutting and cold deformation processing; ②Refine the grain, uniform the ...