The welding residual stress is caused by the uneven temperature distribution of the weldment caused by welding, the thermal expansion and contraction of the weld metal, etc., so the welding constru...
When welding 6061 aluminum and its alloys with AC/DC TIG welding machines, ER4043 (Al-Si5) and ER5356 (Al-Mg5) are the two most commonly used filler wires. Although both wires look silver-white, ...
Shielded Metal Arc Welding (SMAW), commonly known as stick welding, is one of the most versatile and widely used welding processes. It’s the first process many welders learn because equipmen...
Flux-cored welding wire first appeared in the United States and Germany in the 1920s. However, it was not until the 1950s that it was really widely used in industrial production, especially after t...
In the welding process, there are many matters needing attention. Once neglected, it may be a big mistake. These are the points you must pay attention to if auditing the welding process. If you de...
There is no difference in process between full argon arc welding and argon arc welding. Full argon arc welding is suitable for thin-walled small-diameter pipes (generally DN60 and below, wall thick...