1. What is arc striking? What are the ways to start an arc? What should you pay attention to when striking an arc?
The process of igniting and producing a stable arc is called arc ignition. There...
How to Select Welding Materials for Dual-Grade Austenitic Stainless Steel
—In The Case of 304/304L and 316/316L
The key to selecting dual-grade stainless steel welding consumables lies in understa...
Argon tungsten arc welding uses argon as a shielding gas to heat and melt the welding material itself (it is also melted when the filler metal is added) by means of the arc generated between the tu...
Ⅰ. Start up
1. Turn on the power switch on the front panel and set the power switch to the “ON” position. The power light is on. The fan inside the machine starts to spin.
2....
There is no difference in process between full argon arc welding and argon arc welding. Full argon arc welding is suitable for thin-walled small-diameter pipes (generally DN60 and below, wall thick...
ER70S‑6 conforms to AWS A5.18. The designation breaks down as follows:
ER – Electrode or filler rod
70 – Minimum tensile strength of the deposited weld metal: 70,000 psi (~490 MPa)
S – Solid wire
6...