Quality Inspection for 1.6 Mm Welding Electrodes - Surfacing Welding Rod D608 – Tianqiao
Quality Inspection for 1.6 Mm Welding Electrodes - Surfacing Welding Rod D608 – Tianqiao Detail:
Introduction:
D608 is a kind of CrMo cast iron surfacing electrode with graphite type coating. AC/DC. DCRP (Direct CurrentReversed Polarity) is more suitable. Because the surfacing metal is Cr and Mo carbide with cast iron structure, the surfacing layer has higher hardness, higher wear-resistance and excellent silt and ore wear-resistance.
Applications:
Used for welding parts of agricultural machinery, mining equipment, etc. which receive grit wear and slight impact.
| Chemical Composition of Deposited Metal (%) | |||
| Chemical Composition | C | Mo | Cr |
| Guarantee Value | 2.50~4.50 | 3.00~5.00 | 3.00~5.00 |
Hardness of Surfacing Layer: HRC≥55
| Reference Current (AC, DC+) | |||
| Electrode Diameter(mm) | φ3.2 | φ4.0 | φ5.0 |
| Welding Current (A) | 90~120 | 130~160 | 170~210 |
Instructions:
1.The electrodes must be baked under about 250℃ for an hour before welding.
2.In surfacing welding, the weld should be preheated to 400-500℃. If the surfacing thickness permits, a surfacing layer can be made with J507 at first. Then surfacing welding should be done when there is enough heat. The weld should be cooled down slowly after welding.
Packing details:
In carton of 20kgs/net, consisting of 8 boxes x 2.5kgs for 2.5mm, & 4 boxes x 5kgs for other sizes.
With/ without pallets (Fumigation-free pallets) upon customer’s request.
FAQ:
1.Hot specifications:
E6013, E6011, E6010, E7018, S.S. E308, E309, E310, E316
2.OEM design:
Yes, we can print your logo on the welding electrode; also make your brand packing box.
3.Free samples?
Yes, if you need 1 or 2 kgs. But the freight cost is paid by yourside.
4.Certifications:
ISO, SGS, our registered brand “ TIANQIAO” “YUANQIAO”, etc.
5.Delivery time?
10-15 days after we received your deposit.
6. MOQ?
One full 20ft container, that is 25tons.
7 . Payment term?
30% T/T in advance and balance before loading container.
8.Countries and regions exported ?
Europe: Germany, Poland, Italy, Netherlands…
North America: Canada, the USA;
South America: Peru, Chile, Brazil, Venezuela
South East Asia: Thailand, Cambodia, Vietnam, Philippines, Malaysia, Singapore, Indonesia.
9.Service time?
7*24, any time you need.
10.Team:
Factory with 20+ years experience in welding electrode formulation research and development
11.Quality Guarantee?
12 months quality warranty and exchange service against B/L date if any quality problem.
Product detail pictures:
Related Product Guide:
The composition of the welding electrode
We know that we only thrive if we can guarantee our combined rate competiveness and good quality advantageous at the same time for Quality Inspection for 1.6 Mm Welding Electrodes - Surfacing Welding Rod D608 – Tianqiao, The product will supply to all over the world, such as: Leicester, Slovenia, Florida, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Caroline from Las Vegas - 2018.07.27 12:26
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Fernando from Hungary - 2017.12.19 11:10
