With the rapid development of the petrochemical industry, stainless steel materials have been widely used, which has also put forward higher requirements for the welding of pipes and plates. The pr...
TIG
1.Application :
TIG welding (tungsten argon arc welding) is a welding method in which pure Ar is used as a shielding gas and tungsten electrodes are used as electrodes. TIG welding wire i...
Choosing the right welding wire is crucial for achieving strong, clean, and efficient welds. Two of the most commonly used welding wires in steel fabrication are Solid Wire (ER70S series) and Flux...
The welding position is referred to when welding, the relative spatial position of the weld to the welder.
Figure 1. Tianqiao welding positon
There are flat welding, horizontal welding, vertical ...
1. The priority principle of arc welding with electrodes
For the installation and welding of pipelines whose diameter is not too large (such as below 610mm) and the length of the pipeline is not...
There are three types of underwater welding: dry method, wet method and partial dry method.
Dry welding
This is a method in which a large air chamber is used to cover the weldment, and the welder ...