ODM Factory Waste Aluminum Wire, Insulation Welding Wire Waste Aluminum Made in China with High Purity of 99.99%
All we do is usually connected with our tenet ” Customer to start with, Rely on initial, devoting on the food packaging and environmental protection for ODM Factory Waste Aluminum Wire, Insulation Welding Wire Waste Aluminum Made in China with High Purity of 99.99%, We have deep cooperation with hundreds of factories around China. The products we provide can match with your different demands. Choose us, and we won’t make you regret!
All we do is usually connected with our tenet ” Customer to start with, Rely on initial, devoting on the food packaging and environmental protection for Aluminium Wire 8mm 10mm 6mm 4mm 3mm, China Aluminium Wire Scrap 99.9, We maintain long-term efforts and self-criticism, which helps us and improvement constantly. We strive to improve customer efficiency to save costs for customers. We do our best to improve the quality of product. We are going to not live up to the historic opportunity of the times.
Applications:
AWS 5.20 E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.
NOTE: As with all self-shielded wires, E71T-GS does contain fluoride compounds, which require more attention to ventilation when being used to weld galvanized steel. The zinc oxide formed during welding should not be inhaled as it can cause metal fume fever. When welding indoors or in an enclosed area, be sure that the ventilation is adequate.
Self-shielding, all-positional flux-cored wire for single pass applications. Excellent for use on thin gauges of galvanized & mild steel. Travel speed is high & weld edges are smooth. It has a smooth arc action, full slag coverage, easy slag removal & low spatter. No shielding gas is required. The use of DC straight polarity welding current minimises the risk of burn through. Deposition efficiency is higher than that of shielded metal arc electrodes.
Shielding Gas: Gasless
Chemical Composition of deposited metal (%)
| Item | Mn | Si | P | S | A1 | Ni | Mo | Cr | C | V |
| Standard | ≤1.75 | ≤0.60 | ≤0.03 | ≤0.03 | ≤1.80 | ≤0.50 | / | / | / | / |
Mechanical Properties Of Deposited Metal
| Item | Yield Point (MPa) | TensileStrength (MPa) | Elongation (%) | Charpy V-notch Impact Toughness | ||
| Test Temp.(°C) | Impact Energy(J) | Average(J) | ||||
| Standard | ≥400 | ≥480 | ≥20 | / | / | / |
5.Size and Recommended Current (DC-) and Voltage Range
| Size | Voltage Range | Current (DC-) | Wire feed speed |
| 0.8MM | 16~18V | 100~160A | 30~60 |
| 0.9MM | 16~19V | 100~170A | 30~65 |
| 1.2MM | 16~20V | 120~200A | 35~70 |
Available Diameters:
| Dia. (mm): | 0.8 | 0.9 | 1.0 | 1.2 |
| (inch) | 0.030” | 0.035” | 0 .040” | 0.045” |
Packing :
1kg / 5kgs per spool;
precision winding, heat shrinkable film and then packed in cartons.All we do is usually connected with our tenet ” Customer to start with, Rely on initial, devoting on the food packaging and environmental protection for ODM Factory Waste Aluminum Wire, Insulation Welding Wire Waste Aluminum Made in China with High Purity of 99.99%, We have deep cooperation with hundreds of factories around China. The products we provide can match with your different demands. Choose us, and we won’t make you regret!
ODM Factory China Aluminium Wire Scrap 99.9, Aluminium Wire 8mm 10mm 6mm 4mm 3mm, We maintain long-term efforts and self-criticism, which helps us and improvement constantly. We strive to improve customer efficiency to save costs for customers. We do our best to improve the quality of product. We are going to not live up to the historic opportunity of the times.
