Factory Cheap 6014 Welding Rod - ALUMINUM MIG WIRE TIG ROD Aluminum Alloy Welding Wire ER4047 – Tianqiao
Factory Cheap 6014 Welding Rod - ALUMINUM MIG WIRE TIG ROD Aluminum Alloy Welding Wire ER4047 – Tianqiao Detail:
ALUMINUM MIG WIRE TIG ROD Aluminum Alloy Welding Wire ER4047
APPLICATION:
Used for jointing or overlay light alloy processing. It also widely used as filler materials in argon arc welding and oxyacetylene gas welding.
Argon arc welding is a perfect method for welding copper aluminum alloy.
Argon arc welding can not use flux, but oxyacetylene gas welding needs to use aluminum gas welding flux.
The selection of welding wire is mainly based on the type of base metal and the requirements of crack resistance, mechanical properties and corrosion resistance of the joint.
INTRODUCTION:
ER4047 is the eutectic aluminum silicon alloy welding wire with about12% Si element.
Suitable for Al-Si, Al-Si-Mg, Al Si mg Cu wrought aluminium and aluminium (7%Si) argon arc welding. Low melting point and good fluidity.
CHARACTERISTICS:
- Welding Filler Wire
- Spray and Flame Metallizing Wire
- Similar to AlSi12 (Germany), BS N21 (United Kingdom)
- Lower melting point and higher fluidity than 4043 wires
- Can be used as a substitute for 4043 wires to increase silicon in the weld metal, minimize hot cracking and produce higher fillet weld shear strength
- widely used for brazing of aluminum, Al-Mn, Al-Si-Mg alloy materials
SPECIFICATION:
MIG: 0.6mm; 0.8mm; 0.9mm; 1.0mm; 1.2mm; 1.6mm
TIG: 1.2mm; 1.6mm; 2.0mm; 2.4mm; 3.0mm; 4.0mm;
Typical Chemical Composition Of Deposited Metal:
| Cu | Si | Fe | Mn | Mg | Cr | Zn | Ti | Al | ||||||||
| 0.3 | 11.0-13.0 | 0.80 | 0.15 | 0.10 | 0.05 | 0.20 | - | Rem | ||||||||
Product detail pictures:
Related Product Guide:
The composition of the welding electrode
We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to deliver you with great provider of processing for Factory Cheap 6014 Welding Rod - ALUMINUM MIG WIRE TIG ROD Aluminum Alloy Welding Wire ER4047 – Tianqiao, The product will supply to all over the world, such as: Spain, Bangladesh, Ethiopia, Each product is carefully made, it will make you satisfied. Our products in the production process have got strictly monitored, because it is only to provide you the best quality, we will feel confident. High production costs but low prices for our long-term cooperation. You can have a variety choices and the value of all types are same reliable. If you have any question, do not hesitate to ask us.
By Jane from Pakistan - 2017.12.02 14:11
We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
By Karen from Kenya - 2017.08.28 16:02
